Patches
Fs One Patches
FS One 1.1 Upgrade
The v1.1 upgrade includes over 100 minutes of training material and over 40 lessons. Click here to see the specific lessons included in this update
This upgrade should be installed to bring the FS One to Version 1.1. This guide is meant to help you upgrade to the latest version of FS One no matter your current level of upgrade/version. If you are at version 1.0.9 AND have already installed the heli update you can simply download and install the 1.1 Upgrade. If you are unsure what patches you have or have not installed simply reference the version number and follow the instructions. The total approximate install time for this installation is 5 minutes.
- Step 1. Check your version number. If you are currently using version 1.0.8 or later, go to Step 3. The version number you are currently running is listed in the Main Menu of FS One at the bottom.
- Step 2. Install the v1.0.9 patch or if you have FS One - Hangar Pack 1 install this instead, start FS One after the installation has finished to complete installation, and close software.
- Step 3. Install the Heli Update. After the installation has finished, start FS One to complete installation, and close software.
- Step 4. Install the v1.1 Upgrade. After installing the upgrade, you should note that the version number at the bottom of the Main Menu should indicate Version 1.1
If you purchase Hangar Pack 1 after you have installed the 1.1 upgrade, simply install Hangar Pack 1, after the installation has finished start FS One to complete installation, and then reinstall the 1.1 upgrade.
NOTE: This upgrade is for FS One only. It does not apply to FS One Solo. Also if you are using Windows Vista please make sure you have turned off the UAC before doing any upgrades or patches, please see the Vista Installation Guidefor details.
If you have difficulties installing the upgrade, visit www.fsone.com and review the FAQs. If you still have problems after reviewing the FAQs, please contact Hangar9 customer support at (877)504-0233
Fs One Patches
FS One Heli Performance Upgrade
This heli performance upgrade patch updates most existing heli models to improve the flight performance and realism of the heli models. Flight mode switches are reconfigured to match most heli transmitters with the flight mode switch on the left and the throttle hold switch on the right. Pre-existing heli models are retained in a new folder for access unmodified by the performance upgrade patch. It can be installed on 1.0.7 and newer versions.
After downloading the upgrade, simply double click on the upgrade file. This will launch the upgrade installer. Follow the directions and your FS One installation will be updated with the heli upgrade
NOTE: There are still further upgrades after this patch. For these upgrade to be correctly applied you will need to install the 1.0.9 Patch or the 1.1 Upgrade after installing this upgrade, please see the instructions listed under the 1.1 Upgrade.
Fs One Patches
FS One Patch 1.0.9
This patch should be installed to bring the simulation exe to Version 1.0.9. It can be installed over any version prior to Version 1.0.9. It is recommended that you still install the Heli Update patch and the 1.1 Upgrade, see the instructions listed under the 1.1 Upgrade.
After downloading the patch, simply double click on the patch file. This will launch the patch installer. Follow the directions and your FS One installation will be updated to Version 1.0.9. After installing the patch and restarting the sim, you should note that the version number at the bottom of the Main Menu should indicate Version 1.0.9 (if a different version is indicated, the patch was not installed correctly).
The patch includes a readme file that is placed in the base folder of FS One. This readme file (ReadMe_1_0_9.txt) lists the changes included in the patch.
Fs One Solo Patches
FS One Solo Patch 1.0.3
This patch should be installed to bring the simulation exe to Version 1.0.3. It
can be installed over any version prior to Version 1.0.3.
After downloading the patch, simply double click on the patch file. This will
launch the patch installer. Follow the directions and your FS One Solo
installation will be updated to Version 1.0.3. After installing the patch and
restarting the sim, you should note that the version number at the bottom of
the Main Menu should indicate Version 1.0.3 (if a different version is indicated,
the patch was not installed correctly).
The patch includes a readme file that is placed in the base folder of FS One
Solo. This readme file (ReadMe_1_0_3.txt) lists the changes included in the patch.
Aircraft
Fs One Updates
After downloading the Hangar 9 Sneak Peek Update, simply double click on the file
to begin installation. Follow the directions and your FS One installation will be
updated with the planes included with the Hangar 9 Sneak Peek. After installing the
update and starting the sim, the new planes can be found under the Aircraft tab.
Please note that you should only install this update once as multiple downloads will
place multiple copies of the new planes in your airplane listing. These updates require
that your FS One software has been updated to version 1.0.7. If your version of software
is not up-to-date, the update will warn the user and open a browser so they can
download the most current patch.
Fs One Solo Updates
After downloading the Update, simply double click on the file to begin installation.
Follow the directions and your FS One Solo installation will be updated with the
Hangar 9 F-22 Raptor™. After installing the update and starting the sim,
this new plane can be found under the Aircraft tab. Please note that you should
only install this Update once as multiple downloads will place multiple copies
of the F-22 Raptor in your Airplane listing. These updates require that your FS
One Solo software has been updated to version 1.0.3. If your version of software is
not up-to-date, the update will warn the user and open a browser so they can
download the most current patch.